{
 "name": "Bend Bench - Conduit Bending",
 "tagline": "A 6\" offset at 30°: 12\" between the marks, 1-1/2\" of shrink",
 "description": "A 6\" offset at 30°: 12\" between the marks, 1-1/2\" of shrink. Type the height, tap the angle, mark the pipe.\n\nBend Bench is 12 calculators for electricians and apprentices: conduit bending marks and everyday electrical math, built for the job site and fully offline.\n\n8 bends, each with a diagram\nEvery bend draws the pipe with numbered marks and the distances between them.\n• Offset, with near or far critical bend and a distance from the pipe end\n• Rolling Offset: rise and roll in, true offset and pipe rotation out\n• 3-Point Saddle and 4-Point Saddle\n• 90° Stub-Up from your bender's take-up, with gain and cut length when you add the radius and second leg\n• Kick\n• Back-to-Back 90\n• Parallel Offsets for two to six conduits\nMarks are measured along the pipe, and each mark is rounded on its own: to 1/16\" or 1/8\", or to whole millimeters in metric.\n\n4 electrical calculators\n• Ohm's Law: enter any two of voltage, current, resistance and power\n• Power: kW, kVA and amps for DC, single-phase and three-phase, with power factor and optional hp\n• Voltage Drop: drop in volts and percent along a run, copper or aluminum, checked against a limit you set\n• Wire Size: the smallest AWG, kcmil or mm² size that stays inside your limit, with the next size down for comparison\nVoltage Drop and Wire Size use wire resistance only and do not check ampacity.\n\nFractions down to 1/16\"\nA measuring keyboard replaces the phone keyboard: one key each for 1/2, 1/4, 1/8 and 1/16, feet and inches, large keys and large numbers, easy to reach with one hand. There is no Calculate button; results update as you type, and a tap on a result copies it.\n\nJobs and benders\nSave any result with a label such as \"Panel 3 A\", pin the ones you reuse, bring one back with Use again, or share it as text. Choose your bender from built-in EMT presets (1/2\" to 1-1/4\", typical values, so check them against your bender) or add your own with its take-up and optional center-line radius.\n\nImperial or metric\nSwitch once and every calculator follows: inches and AWG, or millimeters and mm². Light, dark or system theme.\n\nA note on use\nBend Bench gives reference calculations. Verify every result against the applicable code and the data from your equipment's manufacturer; local requirements come first. The app does not replace a licensed electrician and does not confirm that a result meets any code requirement.\n\nPrivacy\nEverything runs on your iPhone. No account, no tracking, no network needed; saved jobs stay on the device.\n\nInterface languages: English, German, French, Spanish, Brazilian Portuguese and Russian. Trade terms such as Offset, Saddle and Kick stay in English.",
 "url": "https://debuts.app/apps/bend-bench-conduit-bending",
 "category": "Utilities",
 "platforms": [
  "iPhone and iPad"
 ],
 "pricing": "free",
 "use_cases": [],
 "audience": [],
 "links": {
  "app_store": "https://apps.apple.com/gb/app/bend-bench-conduit-bending/id6818763655",
  "google_play": null,
  "website": null
 },
 "icon": "https://is1-ssl.mzstatic.com/image/thumb/Purple211/v4/24/8e/db/248edb8b-047c-ba96-9be6-1fa72251c427/AppIcon-0-0-1x_U007ephone-0-1-85-220.png/512x512bb.jpg",
 "screenshots": [
  "https://is1-ssl.mzstatic.com/image/thumb/PurpleSource221/v4/a5/0d/6b/a50d6be8-8ce3-8835-bc25-6bae08f904e4/02-keyboard.png/320x480bb.jpg",
  "https://is1-ssl.mzstatic.com/image/thumb/PurpleSource211/v4/ff/d9/65/ffd9657e-0cc7-08d0-53ee-b8de08f63a70/04-wire-size.png/320x480bb.jpg",
  "https://is1-ssl.mzstatic.com/image/thumb/PurpleSource211/v4/24/e0/83/24e083e4-85e9-1513-e407-eb06f6624021/05-history.png/320x480bb.jpg",
  "https://is1-ssl.mzstatic.com/image/thumb/PurpleSource221/v4/34/e8/a3/34e8a308-cfb5-6ff1-d540-7bd5c2dd39b0/06-tools.png/320x480bb.jpg",
  "https://is1-ssl.mzstatic.com/image/thumb/PurpleSource221/v4/af/ee/1b/afee1bfb-cb54-ff5e-78b9-cf8427a86d81/03-saddle.png/320x480bb.jpg",
  "https://is1-ssl.mzstatic.com/image/thumb/PurpleSource221/v4/a2/cc/45/a2cc4533-032b-2e71-19ee-ed22c5962eee/01-offset.png/320x480bb.jpg"
 ],
 "claimed": false,
 "verified": false,
 "maker": "Christopher Thomas",
 "upvotes": null,
 "followers": null,
 "rating": null,
 "ratings": 0,
 "awards": [],
 "launches": [],
 "ai_ready": 78,
 "badges": {
  "launched": "https://debuts.app/badge/bend-bench-conduit-bending?type=launched",
  "award": "https://debuts.app/badge/bend-bench-conduit-bending?type=award",
  "rating": "https://debuts.app/badge/bend-bench-conduit-bending?type=rating"
 }
}