CONDTROL Nivo Remote

Nivo Remote controls CONDTROL laser levels over Bluetooth. Set the rotation speed, scan sector, slope and laser planes from your phone instead of walking back to the instrument.

SUPPORTED INSTRUMENTS • Roto rotary lasers, Gen. 2 (from 2026) • Roto rotary lasers, Gen. 1 (until 2025) • Omniliner and XLiner line lasers (until 2025)

ROTARY LASERS, GEN. 2 • Rotation speed: 300, 600, 1000, 1500 and 3000 rpm • Scan sector: 30, 45, 90 and 120°, or full rotation • Turn the head by holding an arrow • Static mode: full speed with one tap, stop with the next • Laser brightness in three steps • Manual slope on two axes: hold to tilt, release to stop • Digital slope: type the value for each axis, down to one thousandth • Slope units: percent, permille, mm/m, degrees or 1:N • Reset slope to level with one button

ROTARY LASERS, GEN. 1 • Rotation speed up to 600 rpm, scan sector, head rotation • Manual slope on two axes • Connection, slope mode and battery charge in the status bar

LINE LASERS • The app recognises the model and shows its planes • Switch each plane on and off separately • Receiver mode • Brightness in five steps • Battery charge

CONNECTION • Choose the instrument family, the app finds the nearest instrument by signal and connects • Remembers the last instrument and looks for it first • Set a default instrument to skip the picker • Reconnects after a dropped link • The screen stays on while the instrument is connected

LANGUAGES English, German, French, Italian, Spanish, Dutch, Russian.

Nivo Remote works with CONDTROL instruments that have a Bluetooth module. The instrument must be switched on and within Bluetooth range. TruSlope and XLiner 3D are not supported yet.

Auffindbarkeit