LTC CamSync-sovelluksen kuvake

LTC CamSync

Ei lunastettu

Your DJI timecode

Tekijä: Meik Dirkes · Valokuva ja video
Debuts-pisteet 75UusiAnna ensimmäinen arvio
LTC CamSync, kuvakaappaus 1LTC CamSync, kuvakaappaus 2LTC CamSync, kuvakaappaus 3LTC CamSync, kuvakaappaus 4

Samankaltaiset Valokuva ja video-sovellukset

Katso parhaat

Lisää Valokuva ja video-sovelluksia

Viikon parhaat uudet Valokuva ja video-sovellukset

Tietoa

Your DJI timecode. On your GoPro.

LTC CamSync grew out of a real filming need: bring timecode from a DJI Mic 3 receiver to a GoPro without connecting an audio adapter to the camera for this QR workflow.

CONNECT. SYNC. UNPLUG AND SCAN. Connect the DJI Mic 3 receiver to your iPhone using a compatible audio connection and enable A-OUT. The app reads LTC timecode and saves a confirmed sync. Unplug the receiver: the captured clock keeps running on your iPhone and can be passed to compatible GoPro cameras through a QR code.

• Large scan screen with adjustable brightness • Visible time source and elapsed time since the last sync • Drift comparison after reconnecting the receiver • Measured sync-delay correction in seconds or frames • Manual timecode with start, pause and undo • Camera and firmware selection, plus Labs recording-rate and GPS commands • English and German; on-device audio processing, no account or tracking

CHECK COMPATIBILITY BEFORE BUYING Requires iOS 18 or later, a DJI Mic 3 receiver with LTC output and a compatible iPhone connection. A charging-only cable will not work. Other DJI microphone models are not confirmed.

HERO12/13, MAX2 and MISSION 1 support QR timecode with compatible standard firmware. Older supported cameras need GoPro Labs. Extra recording-rate and GPS commands require Labs; availability depends on the camera, firmware and recording mode. HERO13 and MISSION 1 Pro have been used by the developer. Additional models are not claimed as practically tested.

The app does not receive confirmation from the camera. Confirm the sync on the camera and check actual recorded audio and video. Timecode is not genlock: clocks can drift. Re-sync regularly and reconnect the receiver after restarting the iPhone.

Independent app. Not affiliated with, endorsed by or certified by DJI or GoPro. Product names identify compatibility.

Kysymyksiä sovelluksesta LTC CamSync

Mikä LTC CamSync on?
Your DJI timecode
Onko LTC CamSync ilmainen?
Ei. LTC CamSync on maksullinen sovellus.
Millä laitteilla LTC CamSync toimii?
LTC CamSync toimii laitteilla: iPhone.
Millä kielillä LTC CamSync on saatavilla?
LTC CamSync on saatavilla kielillä: saksa, englanti.
Kuka on kehittänyt sovelluksen LTC CamSync?
Sovelluksen LTC CamSync on kehittänyt Meik Dirkes. App Storen ikäraja on 4+.
Mitä vaihtoehtoja sovellukselle LTC CamSync on?
Samankaltaisia sovelluksia Debutsissa: Zoetrope Viewer, PaperSnips, Migumento · QR photo album.

Ihmisten arvio

Kirjaudu sisään arvioidaksesi tämän sovelluksen. Rehellisyys on tärkeintä.

Ei vielä arvioita. Oletko kokeillut sitä? Anna ensimmäinen arvio.

Löydettävyyssignaalit

Miten tekoäly ja ihmiset löytävät sovelluksen LTC CamSync Debutsissa
TekoälyvalmisOsittain
78 % kuvattu tekoälyn kohdennusta varten
Löydettävissä nytKäytössäRakenteinen data tällä sivulla ja Debuts API

Kerro, mistä pidät. Lähetämme sähköpostia vain, kun jokin uusi vastaa toiveitasi, ja kehittäjät lisäävät usein testaajille edun.

Millaisia sovelluksia
Laitteellani:
Näytä vain
Kuinka usein
Lähetämme vahvistuslinkin. Mitään ei tule, ennen kuin napsautat sitä.