Appikon för Steel Weight Takeoff

Steel Weight Takeoff

Inget anspråk gjort

Type a material list line just as it stands

Av RAINBOW TREE LLC · Verktyg
Debuts-poäng 81NyGe det första betyget

Därför förväntar vi oss mycket av den: Clear niche value, transparent JIS sourcing, and honest handling of ambiguous section designations make it a strong debut.

Steel Weight Takeoff skärmbild 1Steel Weight Takeoff skärmbild 2Steel Weight Takeoff skärmbild 3Steel Weight Takeoff skärmbild 4Steel Weight Takeoff skärmbild 5Steel Weight Takeoff skärmbild 6

Kort sagt

Steel Weight Takeoff turns a single material list line, such as 2-H-400×200×8×13×4000, into a weight with its unit and a required quantity by grade and category. It is aimed at people who prepare steel take-offs. One notable feature is that when a designation matches two JIS sections, no result appears until the user picks one.

Sammanfattning från Debuts, baserad på appsidan i App Store.

Om appen

Type a material list line just as it stands. You get the weight with its unit, and the required quantity by grade and category.

■ Reads material list notation as written 2-H-400×200×8×13×4000 / PL-9t / L-65×65×6 / [-100×50×5t / φ22×700 — count, symbol, dimensions and length in one line. Full-width digits and shop names such as "channel" are read too.

■ Never mixes up the unit Sections, flat bars and round bars in kg/m, steel plate in kg/m², cut plate in kg. When units differ inside one take-off sheet, each row carries its own unit.

■ When one designation points to two sections, no answer is given H-400×200 points to two standard JIS sections (396×199×7×11 and 400×200×8×13). They differ by 16.7%, so no result is shown until you pick one. The app never picks quietly for you.

■ Totals come in two tiers Design quantity and the required quantity (design plus allowance), laid out by grade and category. Standard allowances: sections +5%, steel plate +3%, bolts +4%, anchor bolts 0% (Standard Method of Measurement for Public Building Works, MLIT Japan). Change them to your in-house standard if you have one.

■ Put the take-off sheet on paper (Pro, one-time purchase) A4 PDF, and CSV you can paste into your own estimate. Add a project name and hand it to the general contractor or the fabrication shop.

■ Sources are shown on screen Sections and unit masses come from JIS G 3192:2008 (hot rolled steel sections) and JIS G 3466 (carbon steel square tubes); density of steel is 7.85. The edition is printed on screen.

[Shapes] H-section, channel, equal angle, unequal angle, square tube, steel plate, cut plate, flat bar, round bar

[Materials] Steel 7.85 / Stainless 7.93 / Aluminum 2.70 (density can be edited)

The material list, project name and allowance rates you enter stay on this device. They are not stored in iCloud, so they do not move to a new device.

Apart from that, only crash reports and anonymous usage statistics are sent. The contents of your material list, project names and dimensions are not sent. The app shows no advertising.

Så betygsätter folk den

Logga in för att betygsätta appen. Det ärliga betyget räknas.

Inga betyg ännu. Har du provat appen? Ge det första betyget.

Fler appar i kategorin Verktyg

Veckans bästa nya appar i kategorin Verktyg

Signaler för upptäckt

Så upptäcker AI och människor Steel Weight Takeoff på Debuts
AI-redoDelvis
78 % beskrivet för att AI ska kunna matcha
Går att hitta nuLiveStrukturerad data på den här sidan och Debuts API

Berätta vad du gillar. Vi mejlar bara när något nytt matchar, och utvecklare lägger ofta till ett erbjudande för testare.

Vilken sorts appar
På min
Visa bara
Hur ofta
Vi skickar en länk för att bekräfta. Inget kommer innan du har klickat på den.